What should I do if the film sealing machine cannot seal the mouth?
Film sealing machine is composed of chassis, transmission system, sealing system, printing system, and electronic control system, compact structure, simple and easy to use. By heating the heating block, the film sealing machine can achieve the temperature that can seal the film packaging bag, melt the film bag mouth, and then extrude through the rotation of the printing wheel, so that the bag mouth is bonded and printed with patterns, printing wheel can be replaced by printing wheel, can be printed on the production date, and manufacturers, in the use of the process, customers will encounter some problems, today to tell you about the film sealing machine can not seal the mouth how to do?
Cause sealing machine can not seal the reason;
- Not enough temperature
First of all, the film sealing machine temperature is based on the thickness of the film to adjust, if the temperature is not enough can cause sealing failure, especially in the machine just run, let the machine to heat a few minutes, and then processing;
The heater is broken
Check whether the heater is broken, with the control dial temperature display to see whether the temperature is up to standard, if not, is the heater is broken, this is the need to contact maintenance personnel to repair the heater;
- The printing wheel is loose
Check the packaging bag after sealing, whether there is a clear pocket printing wheel, printing is not clear seal printing wheel there loose, you need to repair the printing wheel;
- Control system failure
The operation of the sealing machine is to rely on the control system to complete, when the control system short-circuit or failure, it will result in the packaging bag sealing is not completed, this is the need to contact maintenance personnel to carry out maintenance.
The above is the film sealing machine sealing how to do the answer, I hope that today's knowledge can be very good to help you, reduce the use of the process of problems, resulting in inconvenience.